Connect and Configure Hardwire Ports (Optional)

After all Radio Packs are paired to their Control Unit(s), proceed with connecting any hardwire connections to the CU, if applicable. If this step is not necessary, proceed to Start Communicating.

TIP: Always confirm that the non-Pliant intercom system and the CrewCom wireless system are functioning properly separately before connecting them together.

Process Details

• If connecting a 2-wire intercom system, connect it to the 2-wire intercom ports(s) on the back of the CU. For full connection and configuration instructions, see 2-Wire Intercom Connectivity.
• If connecting a 4-wire intercom system, connect it to the 4-wire intercom port(s) on the back of the CU. For full connection and configuration instructions, see 4-Wire Intercom Connectivity.

TIP: Both 2-Wire and 4-Wire ports can be used simultaneously.

• See Relays if applicable.
• See Stage Announce if applicable.
• See Auxiliary In if applicable.
• See Auxiliary Out if applicable.

What's Next?

After you've connected and configured your hardwire ports, you can Start Communicating.