The CrewCom Radio Pack is available in a standard-sized 4Vol (CRP-44), a 2Vol (CRP-22), and a 1Vol (CRP-12) model. Each of these models are identical, other than the number of controls and their related profiles. The CrewCom Radio Pack is also available in a compact-sized 1Vol (CRP-C12). All versions can be used with the CrewCom system in highly-varying applications and environments.
CRP-44 Top
More About this Diagram
Volume Knobs/ISO Buttons
The volume controls adjust the listening volume of the connected headset for each of their respective assigned conferences. Turning the volume control clockwise increases the audio level, while turning the control counter-clockwise decreases the level.
When pressed, the volume knobs also serve as ISO buttons to allow selective talk around. ISO means that selected users can have an isolated conversation with other ISO-enabled users. While an ISO conversation occurs, the main conference audio can still be heard. ISO must be separately enabled on both the Conference and each desired Profile from CrewWare. (See Wireless ISO for more information.)
Four volume knobs are available on the CRP-44 Radio Pack, and in CrewWare, they are named A, B, C, and D from left to right with the knobs facing away from you.
Talk Buttons
The talk buttons enable or disable the microphone for each of their respective assigned conferences. Talk buttons can be set (from the RP’s Profile) to function with a “Latch” or a “Momentary” press or they can be “Always On” or “Disabled.” When set to “Disabled,” the Talk button has no function and allows for a listen-only conference on that pack.
In addition, CrewCom uses an intelligent latching method for talk buttons. When set to “Latch,” one short press will latch the talk on; however, pressing and holding the talk button will cause the button to act as a momentary switch.
Four talk buttons are available on the CRP-44 Radio Pack, and in CrewWare, they are named A, B, C, and D from left to right with the knobs facing away from you.
Function Buttons (F1/F2)
The left (F1) and right (F2) function buttons can be programmed to assign a variety of functions such as Call, Stage Announce, and GPO Relays. Each function button’s operation is set in the Radio Pack’s profile, which can be customized via CrewWare. Every Radio Pack model has two function buttons. While in the menu, one short press of F1 returns you to the previous menu without saving any changes.
Menu Button
The Menu button provides multiple functions such as access to menu options or toggling between the home operating screen and the secondary operating screen.
- Short Press (less than one second) – Cycles the Radio Pack LCD from the Home Operating screen to the Secondary Operating screen and vice versa.
- Long Press (approximately 3 seconds) – Accesses the menu options of the Radio Pack to view Pack/System Information and make setting adjustments.
- Escape – While in the menu, one short press returns you to the previous menu without saving any changes.
LCD
Display for viewing real-time status of the Radio Pack, navigating menu options, and making subsequent setting adjustments.
Radio Pack Rear
More About This Diagram
Belt Clip
Secure and sturdy belt clip enables Radio Pack wearing via belt or lanyard.
Battery Compartment Door
Secures and protects the Radio Pack’s Lithium-Polymer battery or 3 AA batteries. When the Battery Door Release is pressed, the battery door will release and detach from the Radio Pack.
Battery Door Latch
Pressing the latch opens the Radio Pack’s battery compartment door.
USB (Micro B) Connection
This USB connection is for connecting a Radio Pack to a Control Unit for pairing. The Radio Pack may also be connected to a PC for firmware updates via CrewWare. See Update Firmware.
On/Off Button
The On/Off button powers the Radio Pack on and off when pressed for 3 seconds.
4-Pin Male XLR Headset Connector
Headset connector is a 4-PIN male XLR connection. A compatible headset must be provided by the user. See the SmartBoom PRO and SmartBoom LITE data sheets for the pin wiring information for Pliant's SmartBoom headsets.
|
Local Headset Connection Wiring |
|
|
XLR Pin # |
Description |
|
Pin 1 |
Mic − |
|
Pin 2 |
Mic + |
|
Pin 3 |
Speaker − |
|
Pin 4 |
Speaker + |
CRP-22 Top
The CRP-22 model has the same controls and functions as the CRP-44, with two exceptions: the talk buttons and volume knobs.
More About This Diagram
Volume Knobs/ISO Buttons
Two volume knobs are available on the CRP-22 Radio Pack, and they are named A and B from left to right in CrewWare.
When pressed, the volume knobs also serve as ISO buttons to allow selective talk around. ISO means that selected users can have an isolated conversation with other ISO-enabled users. While an ISO conversation occurs, the main conference audio can still be heard. ISO must be separately enabled on both the Conference and each desired Profile from CrewWare. (See Wireless ISO for more information.)
Talk Buttons
Two talk buttons are available on the CRP-22 Radio Pack, and they are named A and B from left to right in CrewWare.
What’s in the box?
- Radio Pack
- Lithium-Polymer Rechargeable Battery
- USB-A to Micro B Cable for standard-sized RPs; USB-A to USB-C for CRP-C12 compact RPs
- Multi Blade Worldwide Battery Charger/Power Supply (not compatible with CRP-C12 compact RPs)
- Product Overview Guide
- Warranty Registration Card
Note: A one-year product warranty is standard with CrewCom products. Follow the product registration instructions on the Warranty Extension Registration Card and visit Pliant's Product Registration Page to extend your product warranty to two years at no charge. See Warranty Information.
Additional Items Required
In addition to your Radio Pack, at least one of each of the devices listed below is required to complete your CrewCom System (sold separately with included components):
- Control Unit
- Radio Transceiver
- Headset
CRP-12 Top
The CRP-12 model has different controls than the CRP-22 and CRP-44, with two exceptions: the talk button and volume knob are located in the same location as last conference of those packs. For channel selection and single A/B button has been added.
More About this Diagram
Volume Knob/ISO Button
The volume control adjusts the listening volume of the connected headset. Turning the volume control clockwise increases the audio level, while turning the control counter-clockwise decreases the level.
When pressed, the volume knobs also serves as an ISO button to allow selective talk around. ISO means that selected users can have an isolated conversation with other ISO-enabled users. While an ISO conversation occurs, the main conference audio can still be heard. ISO must be separately enabled on both the Conference and each desired Profile from CrewWare. ISO is indicated by the Talk Button rapidly flashing. (See Wireless ISO for more information.)
Talk Button
The Talk button enables or disables the microphone for the selected channel. In the CU's menu, Talk buttons can be disabled or set to function with a “Latch” or a “Momentary” press. The Latch option is not available in High Density Mode.
In addition, CrewCom uses an intelligent latching method for Talk buttons. When set to “Latch,” one short press will latch the talk on; however, pressing and holding the Talk button will cause the button to act as a momentary switch.
Channel Selection Button
The Channel Selection button switches between Channel A and B for the Radio Pack. The LED for the selected channel will be illuminated. Radio Packs can be set up to access both Channels A and B (but only one at a time), only Channel A, or only Channel B.
Call and Stage Announce Buttons (F1/F2)
Each Radio Pack has two function buttons. The left (F1) function button serves as Call when enabled from the CU's menu. The right (F2) function button serves as Stage Announce when enabled from the CU's menu.
Menu Button
The Menu button provides access to menu options.
- Press and hold the Radio Pack Menu button AND press and hold the CU's Menu button. When both Menu buttons are depressed for three seconds, the menu mode is enabled.
- Change the RP’s channel setting by pressing and holding the Menu button AND (while holding) press the Channel button to cycle through setting options A or B, A only, or B only. The Channel button LEDs will illuminate to indicate the active option. Once the desired option is displayed, release the Menu button to select it. When A or B is selected, the RP user must use the Channel Selection button on his or her RP to switch between the channels. The LED for the selected channel will be illuminated.