The CB2 wireless system's operation can be configured according to application needs. The following settings and processes can be found in the BaseStation’s menu under System Configuration.
Adjusting Radio Settings
Customize RF settings for the CB2 wireless system from this menu.
Radio Band
900 MHz Radio Band
Allows adjustment to the BaseStation's radio band; use the navigational controls to select from Full [902–928 MHz], Low [902–915 MHz], or High [915–928 MHz]. Press Enter to save your changes. The default setting for Radio Band contrast is Full.
Note: Band options may be limited according to the model. CRP-12-900AN (Oceania model) is approved for use in Australia and New Zealand and operates only within the high band (the 915–928 MHz frequency range).
Edit BaseStation Radio Band (900 MHz)
Hopping Pattern
Allows adjustment to the BaseStation's hopping pattern; select either Pattern A or Pattern B. The default setting for BaseStation hopping pattern is Pattern A.
Edit BaseStation Hopping Pattern
Adjusting Operational Mode Setting
Change the mode setting for the CB2 wireless system (both the BaseStation and Radio Packs) from this menu. Select either Normal or High Density. The default mode setting is Normal. See Operational Modes (Normal and High Density) for more information.
If RPs have previously been paired, changes to the operational mode will require re-pairing RPs in order to change to the newly selected operational mode.
Edit BaseStation Mode Settings
Adjusting Sync Settings
Customize synchronization settings for the CB2 wireless system from this menu. Select either Sync RF Only or Link Audio and Sync RF. The default sync setting is Sync RF Only. See Synchronization of Multiple Systems for more information.
Edit BaseStation Sync Settings
Adjusting Channels
Edit Channel Settings
Mic Kill Channel A
Mic Kill Confirmation Message
Deleting Radio Pack Pairings
Delete Radio Pack pairings from this menu. Select to Delete All or choose an individual pack from the list to delete.