Local Headset

The following settings can be accessed by pressing the Local button on the front panel of the Control Unit (CU)or by pressing Menu and navigating to Local Headset Settings.

Selecting the Local Headset Conference

The CU headset connector is a functional user communication point, designed primarily for setup and troubleshooting. The Front Panel Headset allows you to communicate on any one of the Conferences at a time. Select a Local Headset Conference from the list available in this menu option. The default Local Headset Conference setting is "None."

Changing the Local Headset Mic Gain

For dynamic microphones, select from within a range of +6 to +35 dB. For electret microphones, select from within a range of -12 to +17 dB. When the Mic Gain is set too high, it is possible to induce clipping, feedback, or echo. When set too low, words may sound too quiet to other listeners. Headsets by different manufacturers or different models of headsets will require widely varying Mic Gain settings.

The default setting for dynamic local mic gain is "6" (+23 dB). The default setting for electret local mic gain is "3" (–4 dB).

Selecting the Local Headset Mic Type

Select from Auto-detect, Dynamic, or Electret mic type. If you select a mic type that does not match the detected type of the connected mic, you will be prompted to accept the exception. It is highly recommended that the default Auto-detect is used.

Adjusting the Local Headset Sidetone

Sidetone value is expressed in dB. When adjusting sidetone, you will see a level indicator with a numeric value between 0 dB and -24 dB. The default setting for local headset sidetone is "Med" (-12 dB). Speak into the headset microphone at a typical speaking level and adjust the sound of your own voice in your headset. Press Enter to accept the changes.