The Control Unit (CU) can be configured depending on user preferences. The following settings and processes can be found in the CU’s menu under Control Unit Settings. These settings can also be managed using CrewWare. (See CU Management Tab.)
Naming a Control Unit
See Name a Device.
Adjusting LCD Display Settings
The LCD display has a few adjustable settings such as Contrast, Brightness, and Backlight Time Out.
LCD Contrast
Allows adjustment to the LCD’s contrast; use the navigational controls to increase or decrease the level of contrast and press Enter to save your changes. The default setting for LCD contrast is 3.
Edit Control Unit LCD Contrast
LCD Backlight Brightness
Allows adjustment to the LCD’s brightness; select either High, Med, Low or Off for brightness level. The default setting for LCD backlight brightness is High.
Edit Control Unit LCD Backlight Brightnes
LCD Backlight Time Out
Enables users to set the amount of time the LCD’s backlight will stay lit after engaging the CU’s interface. Select either 60, 30, or 10 seconds or disable the backlight timer entirely by selecting Disabled. The default setting for LCD backlight time out is Disabled.
Edit Control Unit LCD Backlight Time Out
LED Brightness
Enables users to adjust the brightness of the CU LED indicators (Talk LED for local headset on front of CU). Select either High, Medium, Low, or Off. The default setting for LED brightness is High.
Edit Control Unit LED Brightness